The use of glued laminated timber in construction provides many advantages. In some cases, the advantages are purely technical or aesthetic, but often the use of glued laminated timber is profitable and economical. The popularity of structural glued laminated timber is explained by the fact that for certain tasks, its use is often more profitable than existing alternatives. This applies to the construction of large-span beams, floors, trusses, load-bearing structures of a building, ordering a set of structures for a house, etc. So, glued laminated timber can be used profitably in many cases, but it can be difficult to immediately buy it, exactly the right sizes, characteristics, quality, because the demand for this product is high, and there are not many manufacturers with high-quality European equipment and an affordable price in Ukraine ...

The company Modern Wooden Houses offers a wide range of wall glued laminated timber and produces wooden structures, both standard and bent-glued, as well as beams, trusses to order according to the required parameters. Here is what is important to know before buying glued laminated timber, wooden structures and choosing a seller (manufacturer)...

Parameters of glued laminated timber for sale and technical capabilities of production

Humidity

Glued laminated timber is a dry wall material for building houses, baths, restaurants, hotels, gazebos. When leaving the dryers, it has a humidity of 8-10%, in the building it can gain up to 14%. Due to this, a house made of glued laminated timber has a low shrinkage percentage and does not allow cracks in the wood. Uneven humidity indicators or a significant deviation from the norm may indicate a violation of the technological process, storage or delivery, which in the future can affect the deterioration of the quality of the timber. Therefore, humidity control is very important. The company Sovremennye Derevnye Doma applies antiseptic treatment of timber sets to protect the wood during transportation and construction, and to prevent deterioration of humidity indicators, the appearance of mold on its surface, for the entire duration of construction work.

Technical capabilities of production, sections and size of structural glued laminated timber

In the company Sovremennye Derevnye Doma you can buy structural glued timber of the following section sizes: the range of timber (beam) height from 100 mm - 2.5 m, and timber (beam) width from 100 mm - 1 m. The section size can be quite varied, and orders are individual.

Standard and non-standard section glued wall timber

The easiest way to buy glued laminated timber of standard cross-section for external walls of the European climate zone is 200x200 mm. It is the most popular among customers, since it is the most reasonable in relation to the price to satisfactory technical characteristics, e.g. heat saving. Standard cross-sections are also: 160x200 mm, 120x200 mm, 160x170 mm, 120x170 mm. This list of cross-sections is formed in production by a standard technological process, without additional technological stages, therefore the price of 1 m3 is basic and the difference in the cost of house kits depends mainly on the volume of wood.

However, other types of sections are also available for order: 200x230 mm, 200x270 mm, 240x200 mm, 240x230 mm, 320x200 mm, 320x230 mm, 320x270 mm. This list of sections is formed by production with additional technological steps of the process, therefore the price of 1m3 in them includes additional industrial costs and the difference in the cost of house kits depends on both the volume of wood and the additional stages of the technological process.

The standard length of glued laminated timber is usually 6 m. Lengths of 9, 12, 18 m and more (or in some cases less than 6 m...) are considered non-standard, so the price per m3 of such timber will be calculated separately.

Sale of laminated timber and purchase of ready-made construction kits

Structural glued laminated timber is usually manufactured and sold to order. In our company, you can buy glued laminated timber kits for structures that are manufactured according to the project and installed at the destination. The company Sovremennye Derevyannye Doma sells glued laminated timber kits for half-timbered and domed houses, and you can also order large-span beams and structures for any floors, such as industrial premises, cinema halls, assembly halls, gyms, private houses, etc.

The maximum length of a glued beam to order, under standard production conditions, is up to 18 m, larger sizes are manufactured by special order. The company Sovremennye Derevnye Doma is one of the few in Ukraine that uses bent-glued wooden structures in the construction and manufacture of large-span trusses and ceilings. The smallest bending radius of a bent beam is from 5 m and more.

This allows you to create a modern futuristic design of buildings, and to implement ideas that were considered difficult and expensive to implement just a few years ago. For example, having bought a set of bent-glued wooden beams today you can build a dome house at a very interesting competitive price. As evidence, you can compare the square meter of a dome house from the company Modern Wooden Houses, which will be approximately equal to the price of m2 of a regular frame house.

It is also advantageous to order a set of wooden structures made of glued laminated timber for a half-timbered house from the company Sovremennye Derevyannye Doma, especially if you choose our company for its construction. We offer a flexible system of cooperation, payments and business relations, which would be convenient for the customer. Contact us for contact numbers and via messengers to find out the details - we will be happy to help implement your bold projects and ideas!